HT 20 (A)
Powerful telescopic hookloader — also available as articulated (A) version for 18–26 t trucks
20 t
Lifting capacity (max)
4 750 – 6 725 mm
Unit length
3 200 – 7 800 mm
Container length
18 – 26 t
Chassis GVW
The HT 20 telescopic hookloader delivers high versatility with its sliding system and optional articulation, adapting easily to different container lengths. With a 20-tonne lifting capacity, it is the ideal solution for medium-duty container handling in rental, transport and waste-management applications. Designed for safety and flexible use, it supports a wide range of configurations and performs reliably in demanding environments. The articulated 'A' version reduces the loading angle, lowers the risk of spillage and optimises positioning of both short and long containers on the truck.
Articulated movement (A version)
The articulated arm of the 'A' version reduces the loading angle and the risk of spillage. It also optimises positioning of both short and long containers on the truck, ensuring good weight distribution and load stability. Ideal for tight spaces where minimal ground clearance is required.
20-tonne lifting capacity for versatile use
With a 20-tonne lifting capacity, the HT 20 is ideally suited to medium-duty container handling in rental, transport and waste-management operations. The sliding arm covers container lengths from 3,200 to 7,800 mm with a single vehicle, improving fleet versatility and efficiency.
V Drive versatility
At the cutting edge of controller technology, the V Drive offers intuitive day-to-day operations. The screen's versatility lets you manage all options, connected systems and accessories from a single controller. Five screen modes adapt to the handling phase, application and driver habits.
Technical Specifications
The cranes shown in the brochure may be partly equipped with optional equipment and do not always correspond to the standard versions. Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation errors.
Technical Drawing
Configurations
| Config | Weight | Unit length | Min container | Max container | Tipping angle | Transport height |
|---|---|---|---|---|---|---|
| HT 20 #1 | 2 020 kg | 4 750 mm | 3 500 mm | 5 500 mm | 53° | 240 mm |
| HT 20 #2 | 2 020 kg | 4 900 mm | 3 750 mm | 5 750 mm | 50° | 240 mm |
| HT 20 #3 | 2 060 kg | 5 100 mm | 4 000 mm | 6 000 mm | 48° | 240 mm |
| HT 20 #4 | 2 060 kg | 5 300 mm | 4 000 mm | 6 250 mm | 48° | 240 mm |
| HT 20 #5 | 2 130 kg | 5 500 mm | 4 250 mm | 6 250 mm | 50° | 240 mm |
| HT 20 #6 | 2 140 kg | 5 650 mm | 4 250 mm | 6 500 mm | 48° | 240 mm |
| HT 20 #7 | 2 150 kg | 5 850 mm | 4 250 mm | 6 750 mm | 48° | 240 mm |
| HT 20 #8 | 2 180 kg | 6 000 mm | 4 500 mm | 7 000 mm | 48° | 240 mm |
| HT 20 #9 | 2 200 kg | 6 150 mm | 4 500 mm | 7 000 mm | 46° | 240 mm |
| HT 20 #10 | 2 230 kg | 6 300 mm | 4 750 mm | 7 250 mm | 46° | 240 mm |
| HT 20 #11 | 2 230 kg | 6 450 mm | 5 000 mm | 7 500 mm | 45° | 240 mm |
| HT 20 #12 | 2 240 kg | 6 600 mm | 5 000 mm | 7 500 mm | 45° | 240 mm |
| HT 20 A #1 | 2 380 kg | 5 025 mm | 3 200 mm | 6 000 mm | 53° | 240 mm |
| HT 20 A #2 | 2 380 kg | 5 175 mm | 3 400 mm | 6 200 mm | 50° | 240 mm |
| HT 20 A #3 | 2 430 kg | 5 375 mm | 3 600 mm | 6 400 mm | 48° | 240 mm |
| HT 20 A #4 | 2 430 kg | 5 575 mm | 3 750 mm | 6 600 mm | 48° | 240 mm |
| HT 20 A #5 | 2 520 kg | 5 725 mm | 3 800 mm | 6 800 mm | 50° | 240 mm |
| HT 20 A #6 | 2 520 kg | 5 875 mm | 4 000 mm | 7 000 mm | 48° | 240 mm |
| HT 20 A #7 | 2 520 kg | 5 975 mm | 4 000 mm | 7 000 mm | 48° | 240 mm |
| HT 20 A #8 | 2 585 kg | 6 175 mm | 4 200 mm | 7 200 mm | 48° | 240 mm |
| HT 20 A #9 | 2 585 kg | 6 325 mm | 4 250 mm | 7 400 mm | 46° | 240 mm |
| HT 20 A #10 | 2 675 kg | 6 575 mm | 4 400 mm | 7 600 mm | 46° | 240 mm |
| HT 20 A #11 | 2 675 kg | 6 725 mm | 4 400 mm | 7 800 mm | 45° | 240 mm |
The stated outreaches are measured at a 20° boom angle and are therefore not maximal. When mechanical extension booms are used, the loads in the load charts must be reduced by the weight of the extension booms.
Standard Features & Technology
Connected
All key information — device overviews, service status, technical documents and more — available digitally at any moment. Manage and understand your PALFINGER solutions from anywhere.
Soft Stop
Soft stop ensures the container is smoothly set onto the truck deck after loading or tipping, preventing hard impacts and reducing noise exposure for operators and the surroundings.
Truck CAN connection
A CANBUS connection between the truck and hookloader streamlines wiring to just two wires — safer and more efficient setup with fewer relays and junctions, plus quicker configuration through PALDIAG.
V Drive control
The cab controller's versatile display always gives the operator clear information about functions and system status. Tailor-made ergonomic design with five adaptable screens makes daily operation intuitive.
SDS 180 hydraulics
The SDS 180 distributor enables fast, smooth operation with high oil flow. The intelligent CANbus system delivers power only when needed — saving energy and reducing operating costs.
Sliding arm system
The sliding arm system easily accommodates containers of different lengths — flexibility across a wide range of applications. Smart design ensures smooth, intuitive operation and quick adaptation to varying needs.
Standard adaptability
Adapts to local regulations — rail-road container standards, Scandinavian safety rules, German locking systems (NF, DIN, SCAN, CHEM, ACTS).
Optional Features
Automatic Cycle
Automatically performs all required hydraulic functions in a planned sequence using a single joystick.
Central lubrication
Single-point central lubrication in a safe, convenient position. Simplifies weekly maintenance and increases uptime and component life.
Relative speed
Precise control of arm speed — easily engages the container bar and ensures smooth landing without losing time.
Silent Mode
Flashing lights replace the traditional buzzer — reduces noise without compromising safety. Perfect for night urban environments and e-truck applications.
System Monitoring
In-cab screen and three cameras monitor the system and its surroundings — including a view-tracking function for enhanced operational safety.
Advanced Rapid Motion
Shortens cycle time via high-speed tipping cylinder operation — extension +50%, retraction +30%. Patented and unique on the market.
E-PTO Control via CANbus
Reduced energy consumption through on-demand pump control and optimised oil flow for hookloaders installed on e-trucks.
Rapid Motion
Accelerates cylinder extension during loading or tipping — up to 50% shorter extension time and a more efficient container-handling process.
Underrun guard
PALFINGER rear under-ride protection, compliant with R58-03 — engineered for easy installation and fully compatible with N3 trucks.
Palcover
A safe, easy way to cover containers — ensures secure load-securing and reduces the risk of material shifting or falling off during transport.
Front wall
Front wall can be factory-mounted to simplify final installation and reduce both mounting and wiring time. Optimised tank position with plug-and-play accessory installation.
Hose routing
Pre-fitted pipes on the rear left provide ready-to-use hydraulic lines for additional functions — new hydraulic features can be connected directly to the couplings for faster installation.
Crane mounting interface
Reinforced subframe makes crane installation easy — provides strong, reliable support for heavy lifting. No welding required on the hookloader, making setup simpler and safer.
Request a quote
Interested in the HT 20 (A)?
Request a quote and our sales team will tailor the right solution.