PK 8.501 SLD 3
Light-class SLD — optimised mounting with dependable precision indoors and out
8.1 mt
Lifting moment (max)
5 700 kg
Lifting capacity (max)
11.8 m
Hydraulic outreach (max)
15.8 m
Manual outreach (max)
The PK 8.501 SLD 3 combines proven SLD technology with a durable build and optimised mounting. A lightweight design with dependable precision makes it a versatile choice for both indoor and outdoor work. The Single Link system improves boom geometry and offers fine-tuned control for precise placements. 8.1 mt of lifting moment and 11.8 m of hydraulic outreach (15.8 m manual) deliver class-leading performance — low operating cost per hour.
Dependable precision for all kinds of work
Lightweight yet strong, the PK 8.501 SLD 3 suits both indoor and outdoor work. Single Link provides accurate control while the proven SLD build delivers reliable day-to-day performance.
Optimised mounting
A compact build and just 720 mm of installation footprint allow fitting on a wide range of chassis. The truck's payload stays high — a profitable solution for daily use.
Smartly supported work
PALTRONIC monitors load and stability in real time. Paired with optional HPSC, lifting capacity is safely utilised for each setup.
Technical Specifications
The cranes shown in the brochure may be partly equipped with optional equipment and do not always correspond to the standard versions. Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation errors.
Technical Drawing
Arm Configurations
| Config | Crane Height | Weight | Crane Width | Installation Width | Lifting moment | Outreach | Pressure | Pump | Slewing | Slewing torque |
|---|---|---|---|---|---|---|---|---|---|---|
| PK 8.501 SLD 3 | 2 005 mm | 1 050 kg | 2 300 mm | 720 mm | 8.1 mt | 5.6 m | 33 MPa | 25 – 35 l/min | 400° | 1.0 mt |
| PK 8.501 SLD 3 A | 2 005 mm | 1 140 kg | 2 300 mm | 720 mm | 7.8 mt | 7.6 m | 33 MPa | 25 – 35 l/min | 400° | 1.0 mt |
| PK 8.501 SLD 3 B | 2 005 mm | 1 240 kg | 2 300 mm | 720 mm | 7.6 mt | 9.7 m | 33 MPa | 25 – 35 l/min | 400° | 1.0 mt |
| PK 8.501 SLD 3 C | 2 005 mm | 1 320 kg | 2 300 mm | 720 mm | 7.4 mt | 11.8 m | 33 MPa | 25 – 35 l/min | 400° | 1.0 mt |
The stated outreaches are measured at a 20° boom angle and are therefore not maximal. When mechanical extension booms are used, the loads in the load charts must be reduced by the weight of the extension booms.
Standard Features & Technology
Single Link system
Improves boom geometry and offers fine-tuned control for precise lifts — loads settle into place under control.
Optimised mounting
A 720 mm installation footprint and compact build allow fitting to a wide range of truck chassis — the truck's payload stays high.
PALTRONIC Smart Crane Control
Intelligent control continuously monitors load, position and stability in real time and automatically activates safety, assistance and performance functions.
400° slewing angle
Near-full slewing gives the flexibility to choose load entry and exit angles freely — well suited to varied loading and unloading tasks.
Long outreach
Up to 11.8 m of hydraulic and 15.8 m of manual outreach in C-configuration — ample reach for lifts over a trailer and from deep cargo areas.
Proven SLD design
The Single Link Drive system and robust build deliver a long service life and reliable day-to-day performance — low total cost per operating hour.
Optional Features
Radio remote control
Wireless remote control enables safe, efficient crane operation from a distance. One-person operation, better load visibility and adjustable movement speeds.
HPSC – High Performance Stability Control
Continuously calculates crane stability based on the real position of the stabilisers and adjusts the permitted working range automatically — safer work even in limited space.
Brochures
Request a quote
Interested in the PK 8.501 SLD 3?
Request a quote and our sales team will tailor the right solution.