PK 720 TEC
Heavy-duty precision loader crane combining cutting-edge technology with unmatched performance
68.7 mt
Lifting moment (max)
23 000 kg
Lifting capacity (max)
22.0 m
Hydraulic outreach (max)
34.4 m
Outreach with extension booms (max)
The TEC range combines high precision and cutting-edge technology to deliver unmatched performance. The PK 720 TEC punches above its weight with precise control and intelligent safety systems. The Height and Bound functions support safe operation in confined areas, such as urban work sites with adjacent buildings.
High-powered performance and pinpoint precision
Our TEC models deliver ultra-precise control and flawless handling, even when faced with the most demanding conditions. They combine this with impressive lifting capacity to deliver high performance. This enables operators to perform each and every lift with absolute confidence in their crane.
Efficient operation and pinpoint precision
Our TEC models deliver ultra-precise control and flawless handling, even when faced with the most demanding conditions. Our mid-range cranes combine this with rapid and precise operation for efficient, cost-effective workflows. This enables operators to perform each and every lift with absolute confidence in their crane.
Outstanding performance and precision at height
The deceptively powerful PK 720 TEC delivers outstanding performance when performing challenging lifts at height – thanks in no small part to its industry-leading fly-jib capacity.
Diagrams
Technical Specifications
The cranes shown in the brochure may be partly equipped with optional equipment and do not always correspond to the standard versions. Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation errors.
Technical Drawing
Arm Configurations
| Config | Crane Height | Weight | Crane Width | Installation Width | Lifting moment | Outreach | Pressure | Pump | Slewing | Slewing torque |
|---|---|---|---|---|---|---|---|---|---|---|
| C | 2 470 mm | 6 440 kg | 2 550 mm | 1 640 mm | 64.9 mt | 10.9 m | 38.5 MPa | 100–130 l/min | ∞ | 7.3 mt |
| D | 2 470 mm | 6 730 kg | 2 550 mm | 1 640 mm | 64.1 mt | 12.9 m | 38.5 MPa | 100–130 l/min | ∞ | 7.3 mt |
| E | 2 470 mm | 7 020 kg | 2 550 mm | 1 720 mm | 63.3 mt | 15.0 m | 38.5 MPa | 100–130 l/min | ∞ | 7.3 mt |
| F | 2 470 mm | 7 290 kg | 2 550 mm | 1 720 mm | 62.4 mt | 17.2 m | 38.5 MPa | 100–130 l/min | ∞ | 7.3 mt |
| G | 2 470 mm | 7 530 kg | 2 550 mm | 1 820 mm | 61.7 mt | 19.5 m | 38.5 MPa | 100–130 l/min | ∞ | 7.3 mt |
| H | 2 510 mm | 7 680 kg | 2 550 mm | 1 820 mm | 61.3 mt | 22.0 m | 38.5 MPa | 100–130 l/min | ∞ | 7.3 mt |
The stated outreaches are measured at a 20° boom angle and are therefore not maximal. When mechanical extension booms are used, the loads in the load charts must be reduced by the weight of the extension booms.
Standard Features & Technology
P-Profile
P-profile increases torsional strength while keeping weight low. Self-lubricating materials reduce maintenance needs.
HPSC
High Performance Stability Control — continuously calculates crane stability based on real stabilizer position and maximizes lifting capacity.
Power Link Plus
Reverse linkage allows the knuckle boom to tilt upward by up to 15° beyond horizontal — extended working range for difficult lifts.
Flow Sharing
Intelligently distributes hydraulic oil across multiple crane functions — smooth simultaneous movements.
Low-Maintenance Extension System
Self-lubricating synthetic sliding elements eliminate the need for greasing in the extension system.
Unlimited slewing
Crane rotates without fixed end stops — unrestricted working radius.
Optional Features
Fly Jib
Fly jib extends the working range up to 34.4 m — lifting at greater heights and distances.
Leveling Assistant
Reduces setup time by up to 80% with automated stabilizer leveling.
Smart Boom Control
Single-lever boom tip positioning — vertical, horizontal or diagonal movement.
P-Fold
Automated crane folding via a single control lever — quick preparation for transport.
Memory Position
Stores up to four preset crane positions for quick recall.
HPSC-Plus FSTAB
Monitors stabilizer forces in real time — added safety in demanding lifts.
AOS
Active Oscillation Suppression — reduces boom vibrations and load swing.
Lane Lock
Prevents slewing into dangerous zones — safe operation near traffic.
Slewing Lock
Blocks individually defined slewing angles during operation.
RTC
Rope Tension Control — maintains correct rope tension during crane operation.
SRC
Synchronized Rope Movement — automatically coordinates rope winch movement with boom motions.
WEIGH
Allows loads to be weighed directly with the crane — precise load management without a separate scale.
Brochures
Request a quote
Interested in the PK 720 TEC?
Request a quote and our sales team will tailor the right solution.