PK 7.501K SLD 5
A true workhorse — operator comfort and added lifting headroom for precise placement
6.9 mt
Lifting moment (max)
3 300 kg
Lifting capacity (max)
8.8 m
Hydraulic outreach (max)
400°
Slewing angle
The PK 7.501K SLD 5 unites operator comfort with added lifting headroom for precise load placement. A-HPLS boosts hydraulic pressure with a smooth hydraulic response — ideal for municipal tasks calling for controlled strength. The short-boom K-variant (8.8 m hydraulic outreach) stays nimble in tight urban settings, and the 6.9 mt lifting moment is class-leading. A robust SLD build and 360 bar operating pressure deliver reliable performance in heavy daily duty.
Precise placement with controlled strength
A-HPLS delivers extra power with a smooth hydraulic response — loads settle into place accurately and with control. Ideal for municipal tasks and lifts that demand precision.
Nimble for confined sites
The short-boom K-build keeps the crane nimble on urban worksites and near structures. A 6.9 mt lifting moment is class-leading — power without excess size.
Smartly supported work
PALTRONIC monitors load and stability in real time, and optional HPSC calculates stability from the real position of the stabilisers. Maximum lifting capacity safely utilised for each setup.
Technical Specifications
The cranes shown in the brochure may be partly equipped with optional equipment and do not always correspond to the standard versions. Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation errors.
Technical Drawing
Arm Configurations
| Config | Crane Height | Weight | Crane Width | Installation Width | Lifting moment | Outreach | Pressure | Pump | Slewing | Slewing torque |
|---|---|---|---|---|---|---|---|---|---|---|
| PK 7.501K SLD 5 | 1 930 mm | 765 kg | 2 200 mm | 660 mm | 6.9 mt | 5.0 m | 36 MPa | 30 – 40 l/min | 400° | 0.8 mt |
| PK 7.501K SLD 5 A | 1 930 mm | 845 kg | 2 200 mm | 660 mm | 6.6 mt | 6.9 m | 36 MPa | 30 – 40 l/min | 400° | 0.8 mt |
| PK 7.501K SLD 5 B | 1 930 mm | 915 kg | 2 200 mm | 660 mm | 6.5 mt | 8.8 m | 36 MPa | 30 – 40 l/min | 400° | 0.8 mt |
The stated outreaches are measured at a 20° boom angle and are therefore not maximal. When mechanical extension booms are used, the loads in the load charts must be reduced by the weight of the extension booms.
Standard Features & Technology
A-HPLS – High Power Lifting System
Automatically boosts hydraulic pressure with a smooth hydraulic response — controlled strength for municipal tasks where precision matters.
Short-boom K design
The shorter hydraulic outreach (8.8 m) keeps the crane nimble in tight urban settings and near structures — a full-length boom would be too large.
Operator-friendly control
Engineered for long shifts — smooth movements, precise metering and effortless control keep productivity high all day long.
400° slewing angle
Near-full slewing gives the flexibility to choose load entry and exit angles freely — well suited to varied loading and municipal tasks.
PALTRONIC Smart Crane Control
The intelligent control system continuously monitors load, position and stability in real time and automatically activates safety, assistance and performance functions.
Proven SLD design
The Single Link Drive system and robust build deliver a long service life and reliable day-to-day performance — low total cost per operating hour.
Optional Features
Radio remote control
Wireless remote control enables safe, efficient crane operation from a distance. One-person operation, better load visibility and adjustable movement speeds.
HPSC – High Performance Stability Control
Continuously calculates crane stability based on the real position of the stabilisers and adjusts the permitted working range automatically — safer work even in limited space.
Request a quote
Interested in the PK 7.501K SLD 5?
Request a quote and our sales team will tailor the right solution.