PK 7.001 SLD 3
Lightweight build with High Speed Extension — built for fast load cycles
6.2 mt
Lifting moment (max)
3 300 kg
Lifting capacity (max)
11.2 m
Hydraulic outreach (max)
12.9 m
Manual outreach (max)
The PK 7.001 SLD 3 handles high payloads thanks to its lightweight design — dead weight stays moderate while the truck's payload is preserved. High Speed Extension accelerates boom telescoping without compromising control, making it ideal for repetitive load/unload cycles on tight urban worksites. A 6.2 mt lifting moment, 11.2 m of hydraulic outreach and 400° slewing deliver class-leading performance — proven SLD technology ensures a long service life.
Fast load cycles
High Speed Extension accelerates boom telescoping without compromising control. Repetitive loading and unloading flows efficiently — handling times shrink and productivity rises.
High payload with a lightweight build
Optimised dead weight leaves more payload for the truck without compromising lifting capacity. 6.2 mt of lifting moment and 3,300 kg of capacity are class-leading values.
Smartly supported work
PALTRONIC monitors load and stability in real time. Paired with optional HPSC, lifting capacity is safely utilised for each setup — even when space is limited.
Technical Specifications
The cranes shown in the brochure may be partly equipped with optional equipment and do not always correspond to the standard versions. Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation errors.
Technical Drawing
Arm Configurations
| Config | Crane Height | Weight | Crane Width | Installation Width | Lifting moment | Outreach | Pressure | Pump | Slewing | Slewing torque |
|---|---|---|---|---|---|---|---|---|---|---|
| PK 7.001 SLD 3 | 1 930 mm | 750 kg | 2 200 mm | 660 mm | 6.2 mt | 5.5 m | 33 MPa | 20 – 30 l/min | 400° | 0.8 mt |
| PK 7.001 SLD 3 A | 1 930 mm | 830 kg | 2 200 mm | 660 mm | 5.9 mt | 7.4 m | 33 MPa | 20 – 30 l/min | 400° | 0.8 mt |
| PK 7.001 SLD 3 B | 1 930 mm | 900 kg | 2 200 mm | 660 mm | 5.8 mt | 9.3 m | 33 MPa | 20 – 30 l/min | 400° | 0.8 mt |
| PK 7.001 SLD 3 C | 1 930 mm | 960 kg | 2 220 mm | 660 mm | 5.6 mt | 11.2 m | 33 MPa | 20 – 30 l/min | 400° | 0.8 mt |
The stated outreaches are measured at a 20° boom angle and are therefore not maximal. When mechanical extension booms are used, the loads in the load charts must be reduced by the weight of the extension booms.
Standard Features & Technology
Light design
Optimised dead weight leaves more payload for the truck — 750 kg with 6.2 mt of lifting moment is a strong combination in its class.
High Speed Extension
Faster boom telescoping without compromising control — repetitive load/unload cycles run efficiently, handling times drop.
400° slewing angle
Near-full slewing gives the flexibility to choose load entry and exit angles freely — well suited to varied loading and unloading tasks.
PALTRONIC Smart Crane Control
The intelligent control system continuously monitors load, position and stability in real time and automatically activates safety, assistance and performance functions.
Long outreach
Up to 11.2 m of hydraulic and 12.9 m of manual outreach in C-configuration — ample reach for lifts over a trailer and from deep cargo areas.
Proven SLD design
The Single Link Drive system and robust build deliver a long service life and reliable day-to-day performance — low total cost per operating hour.
Optional Features
Radio remote control
Wireless remote control enables safe, efficient crane operation from a distance. One-person operation, better load visibility and adjustable movement speeds.
HPSC – High Performance Stability Control
Continuously calculates crane stability and automatically adjusts the permitted working range for each setup — maximum lifting capacity safely utilised even when space is limited.
Brochures
Request a quote
Interested in the PK 7.001 SLD 3?
Request a quote and our sales team will tailor the right solution.