PK 5.501 SLD 5
The power package of the SLD range — A-HPLS boost gives extra lifting capacity
5.1 mt
Lifting moment (max)
3 300 kg
Lifting capacity (max)
11.1 m
Hydraulic outreach (max)
12.7 m
Manual outreach (max)
The PK 5.501 SLD 5 is the higher-performing sibling of the PK 5.001 SLD 3 — improved geometry and a higher payload for efficient daily lifting work. The A-HPLS system automatically boosts hydraulic pressure on demand, delivering extra power for heavy pallet handling on tight construction sites. A 360 bar operating pressure, 20–30 l/min pump capacity and Load Sensing valves enable multiple functions in parallel — work cycles stay fast while energy losses stay low.
Power boost for heavy lifts
The A-HPLS system automatically delivers extra power when it is needed — up to 15% more lifting capacity makes heavy pallet handling safe and smooth on tight worksites.
Fast cycles with Load Sensing valves
Load Sensing valves allow several functions to run at once and meter oil flow precisely — short handling times, low energy losses and smooth movements.
Smartly supported work
PALTRONIC monitors load and stability in real time, and optional HPSC maximises lifting capacity for each setup. The operator focuses on the job — the system handles the limits.
Technical Specifications
The cranes shown in the brochure may be partly equipped with optional equipment and do not always correspond to the standard versions. Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation errors.
Technical Drawing
Arm Configurations
| Config | Crane Height | Weight | Crane Width | Installation Width | Lifting moment | Outreach | Pressure | Pump | Slewing | Slewing torque |
|---|---|---|---|---|---|---|---|---|---|---|
| PK 5.501 SLD 5 | 1 830 mm | 725 kg | 2 100 mm | 660 mm | 5.1 mt | 5.3 m | 36 MPa | 20 – 30 l/min | 400° | 0.6 mt |
| PK 5.501 SLD 5 A | 1 830 mm | 795 kg | 2 100 mm | 660 mm | 4.9 mt | 7.2 m | 36 MPa | 20 – 30 l/min | 400° | 0.6 mt |
| PK 5.501 SLD 5 B | 1 845 mm | 860 kg | 2 100 mm | 660 mm | 4.8 mt | 9.2 m | 36 MPa | 20 – 30 l/min | 400° | 0.6 mt |
| PK 5.501 SLD 5 C | 1 885 mm | 920 kg | 2 115 mm | 660 mm | 4.6 mt | 11.1 m | 36 MPa | 20 – 30 l/min | 400° | 0.6 mt |
The stated outreaches are measured at a 20° boom angle and are therefore not maximal. When mechanical extension booms are used, the loads in the load charts must be reduced by the weight of the extension booms.
Standard Features & Technology
A-HPLS – High Power Lifting System
Automatically boosts hydraulic pressure when needed, increasing lifting capacity by up to 15%. Ideal for safely loading heavy pallets on tight construction sites.
Load Sensing valves
Allow multiple functions to run simultaneously with precise oil-flow control — low energy losses and smooth movements.
Improved geometry
Optimised boom geometry delivers 5.1 mt of lifting moment and higher payload for daily lifting tasks — durable performance at a sensible price.
PALTRONIC Smart Crane Control
The intelligent control system continuously monitors load, position and stability in real time and automatically activates safety, assistance and performance functions.
400° slewing angle
Near-full slewing gives the flexibility to choose load entry and exit angles freely — well suited to varied loading and unloading tasks.
Long outreach
Up to 11.1 m of hydraulic and 12.7 m of manual outreach in C-configuration — ample reach for lifts over a trailer and from deep cargo areas.
Optional Features
Radio remote control
Wireless remote control enables safe, efficient crane operation from a distance. One-person operation, better load visibility and adjustable movement speeds.
HPSC – High Performance Stability Control
Continuously calculates crane stability and automatically adjusts the permitted working range for each setup — maximum lifting capacity safely utilised even when space is limited.
Brochures
Request a quote
Interested in the PK 5.501 SLD 5?
Request a quote and our sales team will tailor the right solution.