PK 5.001 SLD 3
The dependable workhorse of the SLD range — durable build with fast work cycles
4.6 mt
Lifting moment (max)
3 300 kg
Lifting capacity (max)
11.1 m
Hydraulic outreach (max)
12.7 m
Manual outreach (max)
The PK 5.001 SLD 3 combines proven PALFINGER technology with a durable, value-driven design. The Single Link Drive system enhances crane geometry and hook power, keeping movements controlled even in lifts that demand precise placement. Fast work cycles make it efficient in confined spaces and under low roofs — typical jobs include warehouse, hall and inner-city material handling. A 400° slewing angle, 330 bar operating pressure and 4.6 mt lifting moment deliver power in a compact package.
Durable SLD build
The SLD range pairs proven PALFINGER technology with a robust build. Engineered for hard daily use — a dependable tool that keeps productivity high year after year.
Precise placement in tight spaces
Single Link Drive improves hook power and geometry, enabling accurate load placement even under low roofs. Fast work cycles keep handling times short.
Smartly supported work
PALTRONIC monitors load and stability in real time. Paired with optional HPSC, lifting capacity is safely utilised for each setup — letting the operator focus on the job.
Technical Specifications
The cranes shown in the brochure may be partly equipped with optional equipment and do not always correspond to the standard versions. Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation errors.
Technical Drawing
Arm Configurations
| Config | Crane Height | Weight | Crane Width | Installation Width | Lifting moment | Outreach | Pressure | Pump | Slewing | Slewing torque |
|---|---|---|---|---|---|---|---|---|---|---|
| PK 5.001 SLD 3 | 1 830 mm | 695 kg | 2 100 mm | 660 mm | 4.6 mt | 5.3 m | 33 MPa | 15 – 25 l/min | 400° | 0.6 mt |
| PK 5.001 SLD 3 A | 1 830 mm | 765 kg | 2 100 mm | 660 mm | 4.4 mt | 7.2 m | 33 MPa | 15 – 25 l/min | 400° | 0.6 mt |
| PK 5.001 SLD 3 B | 1 845 mm | 830 kg | 2 100 mm | 660 mm | 4.3 mt | 9.2 m | 33 MPa | 15 – 25 l/min | 400° | 0.6 mt |
| PK 5.001 SLD 3 C | 1 885 mm | 890 kg | 2 115 mm | 660 mm | 4.1 mt | 11.1 m | 33 MPa | 15 – 25 l/min | 400° | 0.6 mt |
The stated outreaches are measured at a 20° boom angle and are therefore not maximal. When mechanical extension booms are used, the loads in the load charts must be reduced by the weight of the extension booms.
Standard Features & Technology
Single Link Drive system
The SLD design enhances crane geometry and hook power — movements are controlled and accurate load placement is possible even under low roofs.
Fast work cycles
Optimised hydraulics deliver fast, smooth movements — handling times shrink and work flows efficiently even in tight spaces.
400° slewing angle
Near-full slewing gives the operator the flexibility to choose load entry and exit angles freely — well suited to varied loading and unloading tasks.
330 bar operating pressure
High system pressure delivers strong performance in a compact frame — 4.6 mt of lifting moment and 3,300 kg of capacity are class-leading.
PALTRONIC Smart Crane Control
The intelligent control system continuously monitors load, position and stability in real time and automatically activates safety, assistance and performance functions.
Long outreach in a compact design
Up to 11.1 m of hydraulic and 12.7 m of manual outreach in C-configuration — ample reach for lifts over a trailer and from deep cargo areas.
Optional Features
Radio remote control
Wireless remote control enables safe, efficient crane operation from a distance. One-person operation, better load visibility and work outside the danger zone.
HPSC – High Performance Stability Control
Continuously calculates crane stability and automatically adjusts the permitted working range for each setup — maximum lifting capacity safely utilised.
Brochures
Request a quote
Interested in the PK 5.001 SLD 3?
Request a quote and our sales team will tailor the right solution.