PK 22.001L TEC 7
L range — the stronger TEC 7 crane for timber and special-application professionals
21.8 mt
Lifting moment (max)
5 650 kg
Lifting capacity (max)
13.7 m
Hydraulic outreach (max)
440°
Slewing angle
The PK 22.001L TEC 7 is the L range's stronger TEC 7 crane for timber transport and special applications. The narrow design allows installation on smaller platforms, and the 440° slewing angle provides flexibility. The higher 370 bar operating pressure delivers more power than the TEC 3 variant. **21.8 mt of lifting moment, 5,650 kg of capacity**, 13.7 m of hydraulic outreach, 6.6 m stabiliser spread, 440° slewing and 370 bar operating pressure — class-leading compact power for timber and special-application professionals.
Narrow power from the L range
The PK 22.001L TEC 7 combines 21.8 mt of lifting moment and 5,650 kg of capacity with the L range's narrow design — the stronger TEC 7 variant for timber transport.
Higher operating pressure
370 bar operating pressure delivers more power for heavier lifts on the same narrow L platform — the stronger sibling of the TEC 3.
Long 13.7 m reach, 440° slewing
13.7 m of hydraulic outreach combined with a 440° slewing angle — a narrow crane that offers a surprisingly wide working area for tight workspaces.
Technical Specifications
The cranes shown in the brochure may be partly equipped with optional equipment and do not always correspond to the standard versions. Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation errors.
Arm Configurations
| Config | Crane Height | Weight | Crane Width | Installation Width | Lifting moment | Outreach | Pressure | Pump | Slewing | Slewing torque |
|---|---|---|---|---|---|---|---|---|---|---|
| PK 22.001L TEC 7 Std | 2 430 mm | 2 315 kg | 2 550 mm | — | 21.8 mt | 8.5 m | 37 MPa | 65 – 110 l/min | 440° | 2.6 mt |
| PK 22.001L TEC 7 A | 2 430 mm | 2 490 kg | 2 550 mm | — | 21.1 mt | 11.1 m | 37 MPa | 65 – 110 l/min | 440° | 2.6 mt |
| PK 22.001L TEC 7 B | 2 430 mm | 2 650 kg | 2 550 mm | — | 20.5 mt | 13.7 m | 37 MPa | 65 – 110 l/min | 440° | 2.6 mt |
The stated outreaches are measured at a 20° boom angle and are therefore not maximal. When mechanical extension booms are used, the loads in the load charts must be reduced by the weight of the extension booms.
Standard Features & Technology
Narrow L series design
The L range's narrow design allows installation on smaller platforms — ideal for timber transport and special applications where space is limited.
440° slewing angle
The wide 440° slewing angle provides flexibility in tight workspaces — longer slewing than the traditional 360°.
370 bar operating pressure
Higher operating pressure than the TEC 3 variant delivers more power for heavier lifts on the same narrow platform.
HPSC – High Performance Stability Control
Standard HPSC continuously calculates crane stability based on the real position of the stabilisers and maximises lifting capacity.
P-Profile — strong, light, precise
The optimised P-Profile boom delivers high torsional strength and reduces deflection — precise movements even at long reach.
Low-maintenance extension system
Self-lubricating synthetic sliding elements and a corrosion-resistant coating extend service life — lower maintenance costs.
Optional Features
Radio remote control
Wireless remote control enables safe, efficient crane operation from a distance — one-person operation and better load visibility.
Smart Control — precise lifting work
Move the crane tip vertically, horizontally or diagonally with a single lever — the system automatically coordinates all boom movements.
Request a quote
Interested in the PK 22.001L TEC 7?
Request a quote and our sales team will tailor the right solution.