Back

PK 10002 SH

Compact High Performance — stable lifting with fast setup for confined urban worksites

9.4 mt

Lifting moment (max)

5 700 kg

Lifting capacity (max)

14.1 m

Hydraulic outreach (max)

16.1 m

Manual outreach (max)

The PK 10002 SH is a compact High Performance crane optimised for efficient, stable lifting in confined urban worksites. HPSC optimises stabiliser extension and pressure distribution so maximum lifting capacity is safely utilised in each setup. SINGLE LINK PLUS extends the reach envelope, the Low-Maintenance Extension System reduces upkeep, and PALcom P7 remote control adds comfort for long shifts. 9.4 mt of lifting moment, 14.1 m of hydraulic outreach (16.1 m manual) and 365 bar operating pressure are class-leading values.

Stable lifting in limited space

HPSC optimises stabiliser extension and pressure distribution for every setup. Maximum lifting capacity is safely utilised even on tight urban worksites — fast setup, less guesswork.

Stable lifting in limited space

Longer reach with SINGLE LINK PLUS

SINGLE LINK PLUS extends the reach envelope and improves geometry — loads reach their destination even in hard-to-access spots, accurately and under control.

Longer reach with SINGLE LINK PLUS

Comfort for all-day work

The PALcom P7 remote is designed for long shifts. Ergonomic shape, fine-tuned joysticks and a clear display keep the operator sharp all day long.

Comfort for all-day work

Technical Specifications

Lifting moment (max)9.4 mt
Lifting capacity (max)5 700 kg
Hydraulic outreach (max)14.1 m
Manual outreach (max)16.1 m
Slewing angle400°
Slewing torque1.0 mt
Operating pressure (max)365 bar
Pump capacity40 – 50 l/min
Crane height2 150 mm
Crane width (folded)2 380 mm
Installation space700 mm
Outrigger width (standard)3.2 m
Dead weight (standard)1 070 kg

The cranes shown in the brochure may be partly equipped with optional equipment and do not always correspond to the standard versions. Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation errors.

Technical Drawing

Arm Configurations

ConfigCrane HeightWeightCrane WidthInstallation WidthLifting momentOutreachPressurePumpSlewingSlewing torque
PK 10002 SH2 150 mm1 070 kg2 295 mm700 mm9.4 mt5.8 m36.5 MPa40 – 50 l/min400°1.0 mt
PK 10002 SH A2 150 mm1 170 kg2 295 mm700 mm9.1 mt7.6 m36.5 MPa40 – 50 l/min400°1.0 mt
PK 10002 SH B2 150 mm1 270 kg2 295 mm700 mm8.8 mt9.7 m36.5 MPa40 – 50 l/min400°1.0 mt
PK 10002 SH C2 150 mm1 370 kg2 330 mm700 mm8.5 mt11.8 m36.5 MPa40 – 50 l/min400°1.0 mt
PK 10002 SH D2 150 mm1 460 kg2 380 mm735 mm8.2 mt14.0 m36.5 MPa40 – 50 l/min400°1.0 mt

The stated outreaches are measured at a 20° boom angle and are therefore not maximal. When mechanical extension booms are used, the loads in the load charts must be reduced by the weight of the extension booms.

Standard Features & Technology

HPLS – High Power Lifting System

HPLS – High Power Lifting System

Automatically boosts hydraulic pressure when needed, increasing lifting capacity by up to 15% — extra power for safely handling heavy loads.

SINGLE LINK PLUS

SINGLE LINK PLUS

Extended reach envelope with efficient geometry — loads reach their destination even in hard-to-access spots, accurately and under control.

Vähähuoltoinen jatkojärjestelmä

Low-maintenance extension system

Self-lubricating synthetic sliding elements and a corrosion-resistant coating extend service life — lower maintenance costs.

High Speed Extension

High Speed Extension

Boosts boom telescoping speed by up to 30% by reusing return oil — handling times drop noticeably.

PALcom P7 -kauko-ohjaus

PALcom P7 remote control

An ergonomic, durable radio remote for long shifts — clear display, fine-tuned joysticks and adjustable movement speeds.

PALTRONIC Smart Crane Control

PALTRONIC Smart Crane Control

Intelligent control continuously monitors load, position and stability in real time and automatically activates safety, assistance and performance functions.

Optional Features

HPSC – High Performance Stability Control

HPSC – High Performance Stability Control

Optimises stabiliser extension and pressure distribution for each setup — maximum lifting capacity safely utilised even in limited space.

Soft Stop

Soft Stop

Soft stop dampens boom movements at the end of work cycles — less impact on the structure and smoother load handling.

AOS – Active Oscillation Suppression

AOS – Active Oscillation Suppression

Active oscillation suppression smooths boom motion at sudden stops and load changes — steadier lifts and reduced wear.

Request a quote

Interested in the PK 10002 SH?

Request a quote and our sales team will tailor the right solution.