PC 3800 Compact
Compact-range powerhouse — 3.7 mt in a small package
3.7 mt
Lifting moment (max)
2 000 kg
Lifting capacity (max)
5.0 m
Hydraulic outreach (max)
7.1 m
Manual outreach (max)
The PC 3800 Compact combines the Compact range's agile build with impressive lifting capacity in a single package. 3.7 mt of lifting moment, 5 m of hydraulic outreach and remote-control support make it a versatile solution for more demanding lifting tasks on small chassis. A 445 mm installation footprint and 238 kg dead weight preserve the truck's payload — a small footprint with big performance.
More power in the Compact range
The PC 3800 Compact delivers 3.7 mt of lifting moment and 5 m of hydraulic outreach — impressive performance in a compact build. Suited to sites where the PC 2700 isn't quite enough but space is limited.
Flexible installation
The BS 010 stabiliser system enables installation on different chassis — a double crossbeam without additional outriggers, or with an optional extra outrigger, depending on the application.
Fits light chassis
A 238 kg dead weight and 445 mm installation footprint make the PC 3800 Compact a versatile choice for light trucks and vans — the payload is preserved.
Technical Specifications
The cranes shown in the brochure may be partly equipped with optional equipment and do not always correspond to the standard versions. Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation errors.
Technical Drawing
Arm Configurations
| Config | Crane Height | Weight | Crane Width | Installation Width | Lifting moment | Outreach | Pressure | Pump | Slewing | Slewing torque |
|---|---|---|---|---|---|---|---|---|---|---|
| PC 3800 A | 1 630 mm | 238 kg | 770 mm | 445 mm | 3.7 mt | 3.7 m | 20 MPa | 12 l/min | 325° | 0.38 mt |
| PC 3800 B | 1 630 mm | 262 kg | 770 mm | 445 mm | 3.6 mt | 5.0 m | 20 MPa | 12 l/min | 325° | 0.38 mt |
The stated outreaches are measured at a 20° boom angle and are therefore not maximal. When mechanical extension booms are used, the loads in the load charts must be reduced by the weight of the extension booms.
Standard Features & Technology
Compact design
The Compact range's agile build enables installation on light trucks and vans without sacrificing payload — a small footprint with impressive lifting performance.
Greater lifting moment
3.7 mt of lifting moment delivers more power for demanding lifts than the PC 1500 and PC 2700 — in the same compact build.
Winch support
Cable winch support broadens the use cases — suitable for lifts where the load travels further and farther from the boom.
BS 010 outrigger system
A double crossbeam and optional additional outrigger enable installation on different chassis and worksites — stability and versatility in one package.
Agile and precise
A 325° slewing angle and precise hydraulic control make even small lifts controlled and safe — ideal for urban worksites and confined spaces.
Manual extension
A manual extension increases the reach from 5 m to 7.1 m — extra range when you need it.
Optional Features
Radio remote control
Wireless remote control enables safe, efficient crane operation from a distance. One-person operation, better load visibility and work outside the danger zone.
Request a quote
Interested in the PC 3800 Compact?
Request a quote and our sales team will tailor the right solution.